XDEEP HYDROS 40 DIR Full Set BCD

XDEEP HYDROS 40 DIR Full Set BCD

(Aluminium or Steel Back Plate)

The Classic Twinset Wing that Familiar in Looks, Innovative & Functional in Use. Designed to Exceed the Expectations of Demanding Tec Divers.

Familiar in looks, innovative and functional in use.
While XDEEP HYDROS system might be easily recognisable, every element has been oriented to improve a better diving experience. Combining all of the elements around a carefully calculated geometry to improved stability in the water.
XDEEP HYDROS eliminated the ‘dead zones’ that trap air, increasing drag or affecting buoyancy. XDEEP ensured that you will have a great access to your valves through a careful top wing design. Holding flat and expert trim in this wing is made easy, whether you are a new technical diver or have hundreds of decompression dives and want the security and comfort of the best system possible.

Trim and Stability to meet the most critical eye.
Stable position in the water is often the hardest skill for a new technical diver, but for the experienced technical diver they want their equipment to help, not be something they have to compensate for.
The XDEEP HYDROS was designed so that the buoyancy in the wing perfectly matches the centre of gravity of the gas in your twinset.
Regardless of the inflation level of the wing, or the remaining cylinder pressure, the system trim will not change during the dive.

Valve Shutdowns – faster and safer.
A flap of wing that will slows down your response to a problem is the last thing you want between you and your valves.
Shutdowns and valve management have been improved by reducing the volume of the wing in the valve area, and through the area where you want to route your hoses.
Its easier to configure a clean and tidy hose routing, leaving your valves clear and accessible.

Reduced drag but the same buoyancy.
Smaller contour wings have less drag and a lower risk of entanglement. In classic twinset BCD designs if you reduce the contour of the wing, then you lose overall buoyancy. Not in the HYDROS.
By minimizing the dead zone in the HYDROS from the central part of the bladder, we have reduced the overall wing contour and kept all the buoyancy you need. A bit of lateral thinking!

Comfortable and high up at the surface.
It is a challenge to design a wing that holds you in perfectly flat trim underwater, yet holds you upright and high at the surface. Most designs want to push your face back underwater. In the HYDROS the design ensures that the majority of the wing and therefore buoyancy is kept beneath the surface.
Even loaded with two full stages and gear for a deep technical dive, HYDROS will hold you high and comfortable out of the waves.

Customise your HYDROS to your exact needs.
When ordering the full set, you can choose the size of wing, the inflator length and the type of backplate that meets your specifications. The full system will come assembled, configured and ready to dive.
Lift to match your needs.

Two robust and reliable wings are available in the HYDROS product range. You can choose and configure the wing according to the dives you are doing and your own build and preferences.
The XDEEP HYDROS 40 has 18 kg (40 lbs) of lift and is perfect for twin 7 litres or twin 12’s and a single stage.
The XDEEP HYDROS 50 , with its 22 kg (50 lbs) of lift, suits both the larger diver and more demanding technical dives that need larger capacity main cylinders and multiple stages.